Fire Flame Detection Project with Flame Module

With this project, you can detect a fire flame using the Flame module. This project is built with the Flame module, which is a fire detection module. The module identifies the fire through an infrared fire receiver sensor and activates the output. This sensor can be used as a fire alarm.

How to use the Fire Flame Detection Project with the Flame Module

After you have built the project, provide a power supply between 7.4 volts and 30 volts to the project’s input, and the project will turn on. If the output becomes active when it turns on, there may be a beep sound. This is because the module has high sensitivity, and you need to adjust the module’s sensitivity through the potentiometer on the module.

There are two LEDs on this project, a red one and a green one, as well as a buzzer. When the fire flame is detected by the project, the red LED and the buzzer will turn on, and it will display the fire flame detection message on the LCD. If the fire flame is not detected, the green LED will remain on, and it will display the message ‘No fire flame’ on the LCD.

List of components used

This project has:

3 months guaranteed support through ticket system

Money back guarantee in case of dissatisfaction ( according to the rules )

Free update

If you have any questions about Project, please ask in the comments section.